|
|
| Author |
Thread Statistics | Show CCP posts - 1 post(s) |
Jas Dor
Republic University
Minmatar Republic
33
   |
Posted - 2012.01.29 22:05:00 -
[1] - Quote
Owned blueprint filter under the manufacturing tab is broken. It is showing everything, not simply what I own.
It fixed itself after I hit refresh a couple of times. |
Jas Dor
Republic University
Minmatar Republic
33
|
Posted - 2012.01.29 22:36:00 -
[2] - Quote
Tower settings need a place to select charters and the type of charters needed. Cost per slot needs a way to input in the number of active slots.
It would be nice if this could could tie back into blueprints to give a cost per level of ME/PE. An ISK per hour calculator where I could input a contracts sale price with start and end ME/PE levels for a selected blueprint would be helpful. A way to do the same with copyslots would be helpful (though that is probably non-complex enough to do easily with a spreadsheet).
For the hub systems, is there any way to set a designated market alt and take their skills/standings into account?
Does this program take implants into account?
For T1 ships it would be nice to be able to compare the isk per hour for building off the print with the isk per hour of selling copies.
|
Jas Dor
Republic University
Minmatar Republic
34
|
Posted - 2012.01.30 01:29:00 -
[3] - Quote
Can you add a where is this BPO feature? According to the import I have a number of BPOs that don't show up in assets. They're probably in a container somewhere (these are minor things like T1 nanofiber), but it's going to drive me nut until I track them down.
Edit- the autoupdates feature is not working for me. I'm getting a can't find file to download error. |
Jas Dor
Republic University
Minmatar Republic
34
|
Posted - 2012.01.30 05:17:00 -
[4] - Quote
SVR numbers feel low. Are you maybe counting the current day as a full day when doing the average? Either that or the low volume on Mondays and Tuesdays is throwing the average for the rest of the week. |
Jas Dor
Republic University
Minmatar Republic
34
|
Posted - 2012.01.31 06:32:00 -
[5] - Quote
Am I wrong in thinking that the manufacturing list screen now shows a 30 day average and not the current lowest sell order? |
Jas Dor
Republic University
Minmatar Republic
37
|
Posted - 2012.02.06 06:17:00 -
[6] - Quote
Quick question. If I'm looking at a component using item (say a T2 Expanded Cargohold) and I have none of the required component BPOs but I put assume 30/15 into the temp box, does the program assuming I have all the component BPOs at 30/15 or at 0/0? Also if I have none of the relevant invention/reverse engineering skills but am using the manufacturing tab to evaluate potential profitability how does the program handle it (does it assuming 4/4/4 or something)? |
Jas Dor
Republic University
Minmatar Republic
48
|
Posted - 2012.02.10 03:37:00 -
[7] - Quote
The .msi file still says it's for 2.0. Is this the most up to date install? |
Jas Dor
Republic University
Minmatar Republic
53
|
Posted - 2012.02.12 04:56:00 -
[8] - Quote
Zifrian wrote:Jas Dor wrote:The .msi file still says it's for 2.0. Is this the most up to date install? Yes. I only change the number for significant updates but I always rebuild the install and binary files when I commit any minor build changes.
Is that perhaps why I the autoupdater isn't running on Vista machines? (Also it wants me to uninstall everything and do a reinstall to manually update to the current version, I'm not adverse to doing this but don't want to have to reenter all my BP data). |
Jas Dor
Republic University
Minmatar Republic
55
|
Posted - 2012.02.12 17:20:00 -
[9] - Quote
Zifrian wrote:Jas Dor wrote:Zifrian wrote:Jas Dor wrote:The .msi file still says it's for 2.0. Is this the most up to date install? Yes. I only change the number for significant updates but I always rebuild the install and binary files when I commit any minor build changes. Is that perhaps why I the autoupdater isn't running on Vista machines? (Also it wants me to uninstall everything and do a reinstall to manually update to the current version, I'm not adverse to doing this but don't want to have to reenter all my BP data). I'm not sure why the updater won't run on Vista. Are you talking about upgrading from version 1.3 to 2.0? If so, that is correct. You'll need to uninstall the old version and install the new. I switched Database versions so people wouldn't have to install another file just to run it, plus I couldn't get it to work with 64 bit office users. I understand you'll lose your BPs entered but there isn't a work around for that. Sorry. I'm adding some functionality to 2.0 that will allow backups of BPs and the ability to import them from csv files, etc so this won't be an issue in the future. If you don't want to uninstall the old version, download the binary files and just run it from a separate folder.
Nope this is upgrading from one version 2.x to another version of 2.x. I finally bit the bullet last night an uninstalled.
|
Jas Dor
Republic University
Minmatar Republic
56
|
Posted - 2012.02.13 00:05:00 -
[10] - Quote
Zifrian wrote:Jas Dor wrote:Nope this is upgrading from one version 2.x to another version of 2.x. I finally bit the bullet last night an uninstalled.
OK that's an issue. I'll do some research on vista. Not having issues with Win 7 and XP. Does it give a specific error or just "can't update?"
It gives an error that says something like this program already exists (something about uninstall). To make things even stranger the most recent version of EPH does not generate the error (I went from version 2.0 to the new one). |
|
|
Jas Dor
Republic University
Minmatar Republic
60
|
Posted - 2012.02.15 04:47:00 -
[11] - Quote
Does IPH list m3 of output anywhere? Trying to figure out how much hauling some of these scenarios would involve. |
Jas Dor
Republic University
Minmatar Republic
61
|
Posted - 2012.02.15 23:47:00 -
[12] - Quote
ME levels do not seem to be effecting the build requirements for POS components. A Silo at ME 0 and at ME 100 still takes 50,000 trit. |
Jas Dor
Republic University
Minmatar Republic
63
|
Posted - 2012.03.03 18:13:00 -
[13] - Quote
Would it be possible to set Broker Relations, Accounting, faction and corp standing separate from my characters skills? That would help in determining IPH when you have an industrial character and a market alt. |
Jas Dor
Republic University
Minmatar Republic
63
|
Posted - 2012.03.04 01:14:00 -
[14] - Quote
Integrity Response Drones - a component in POS construction are not showing a value. |
Jas Dor
Republic University
Minmatar Republic
63
|
Posted - 2012.03.04 02:54:00 -
[15] - Quote
Ok lets see.
1. I had just done a new install onto a Windows 7 machine (fixed vista).
2. While I thought I had then updated prices, a bunch of data looked strange. (I had been away for two weeks when Vista died).
3. Somehow the program allowed a price download without any section checked.
What I think happened is that it pulled off a hub/region where Eve Central did not have price data for that particular item but used the Jita SVR values.
I have just now attempted to replicate and found myself unable to do so. |
Jas Dor
Republic University
Minmatar Republic
63
|
Posted - 2012.03.05 05:21:00 -
[16] - Quote
Components seem to not be flowing through properly on the manufacturing spreadsheet. This was spotted by:
Set to show only moon harvesting arrays (use one cap construction part each)
1. Type in 100ME/20PE in the assume BPO filter - note price
2. Now go to the manage blueprint tab and add a BPC for capital construction components with a 100ME/20PE.
Recompute and note that the isk per hour rises. |
Jas Dor
Republic University
Minmatar Republic
63
|
Posted - 2012.03.07 02:19:00 -
[17] - Quote
I think I've found the reason for the missing values. I set up some BPCs and decided to run values on the Moros. Capital Turret Hardpoint came up with a zero value. Flipping to eve central I see that it's had a movement of 0 in the last however many hours. I'm guessing two things happened 1. You have set the input to pull things only with a movement greater than zero. This mean there was no value to download. Further, since I had a new install there was no older value to use.
BTW we need an override market cost window in blueprints to reflect ships that are normally sold through contracts. |
Jas Dor
Republic University
Minmatar Republic
74
|
Posted - 2012.03.18 19:10:00 -
[18] - Quote
Nalha Saldana wrote:The problem with the low SVR filter is that its set to 1, that means you can fill the market by yourself and that shows how weak that market truly is. A good SVR filter would be at something like 10 at least.
Also if you add Quality Firsts suggestion do it to meta items too =)
Edit: there was another patch and now it works fine.
An SVR slider, to set minimum with an optional slider to set maximum would be nice. Low SVR items are nice to put into build for a day when high SVR items comes out of the cooker and go to market (assuming you don't already have mats to put in another run).
|
Jas Dor
Republic University
Minmatar Republic
75
|
Posted - 2012.03.22 02:24:00 -
[19] - Quote
I normally pull prices for Jita. As a change of pace I pulled prices from Amarr. The SVR numbers did not change when I switched market hubs. |
Jas Dor
Republic University
Minmatar Republic
130
|
Posted - 2012.04.13 02:44:00 -
[20] - Quote
Zifrian wrote:J'J'J'Jita wrote:I cannot fly a Hulk. But on the mining tab, I want to calculate isk per hour with a Hulk for mining things. Even when I override my skills to be all-level-5 (via the checkbox, which seems to uncheck itself next time I go back to character skills menu) I cannot select Hulk as a mining ship option. I set mining / astrogeo as L5 on mining tab already.
How do I select Hulk? Yeah, it's acting screwy. I need to fix it. Try changing the exhumer level and make sure all necessary skills are there. You might just need to change the combo values to get it to show.
If you do not update all prereqs the program is defaulting back to the API skills. (Tried setting invention skills that my alt has that my main doesn't and it reverted back on me). |
|
|
|
|
| |
|